Upgrade to v1.3

You can upgrade your access gateways remotely from the NMS or SSH directly into them and run an apt-get install.

The Access Gateway version needs to be equal to or less than the version of your Orc8r. We recommend you update your Orc8r first.

NMS Autoupgrade

If you've set up your Access Gateways in upgrade tiers already, you can upgrade them automatically from the NMS.

Navigate to the "Equipment" tab of the NMS and select "Upgrade" on the upper right. In the next modal window, find the tier that your target AGW is a member of (probably default), then set the desired software version for that tier to 1.3.0-1602477016-723feee0. The AGWs in this tier will pull this configuration and upgrade automatically. By default, we check for an upgrade every 5 minutes.

When the gateway completes its upgrade, you should see that its reported software version in. If it hasn't changed, something probably went wrong with the autoupgrade. You will probably have to SSH into the AGW to troubleshoot the installation (see the next section).

If you want to roll out an upgrade slowly to your fleet, you can segment your AGWs into different tiers and upgrade tiers one-by-one. Use the NMS to create new tiers and assign your AGWs to them.

Manual Upgrade

SSH into your target AGW then:

sudo apt-get update
sudo apt-get install magma=1.3.0-1602477016-723feee0