Quick Start Guide
The quick start guide is for developing on Magma or just trying it out. Follow the deployment guides under Orchestrator and Access Gateway if you are installing Magma for a production deployment.
With the prereqs installed, we can now set up a minimal end-to-end system on your development environment. In this guide, we'll start by running the LTE access gateway and orchestrator cloud, and then register your local access gateway with your local cloud for management.
We will be spinning up a virtual machine and some docker containers for this full setup, so you'll probably want to do this on a system with at least 8GB of memory. Our development VM's are in the 192.168.60.0/24, 192.168.128.0/24 and 192.168.129.0/24 address spaces, so make sure that you don't have anything running which hijacks those (e.g. VPN).
In the following steps, note the prefix in terminal commands.
HOST means to
run the indicated command on your host machine, and
MAGMA-VM on the
vagrant machine under
Provisioning the environment
Go ahead and open up 2 fresh terminal tabs. Start in
Terminal Tab 1: Provision the AGW VM
The development environment virtualizes the access gateway so you don't need any production hardware on hand to test an end-to-end setup. We'll be setting up the LTE AGW VM in this tab.
HOST [magma]$ cd lte/gateway HOST [magma/lte/gateway]$ vagrant up magma
This will take a few minutes to spin up the VM. While that runs, switch over to...
Note: If you are looking to test/develop the LTE features of AGW, without cloud based network management, you can skip the rest of this guide and try the S1AP integration tests now.
Terminal Tab 2: Build Orchestrator
Here, we'll be building the Orchestrator docker containers.
HOST [magma]$ cd orc8r/cloud/docker HOST [magma/orc8r/cloud/docker]$ ./build.py -a
This will build all the docker images for Orchestrator. The
vagrant up from
the first tab should finish before the image building, so you should switch
to that tab and move on for now.
vagrant up in the first tab finishes:
Terminal Tab 1: Build AGW from Source
We will kick off the initial build of the AGW from source here.
HOST [magma/lte/gateway]$ vagrant ssh magma MAGMA-VM [/home/vagrant]$ cd magma/lte/gateway MAGMA-VM [/home/vagrant/magma/lte/gateway]$ make run
This will take a while (we have a lot of CXX files to build). With 2 extensive build jobs running, now is a good time to grab a coffee or lunch. The first build ever from source will take a while, but afterwards, a persistent ccache and Docker's native layer caching will speed up subsequent builds significantly.
You can monitor what happens in the other tab now:
Terminal Tab 2: Start Orchestrator
Once the Orchestrator build finishes, we can start the development Orchestrator cloud for the first time. We'll also use this time to register the local client certificate you'll need to access the local API gateway for your development stack.
To start Orchestrator (without metrics) is as simple as:
HOST [magma/orc8r/cloud/docker]$ ./run.sh Creating orc8r_postgres_1 ... done Creating orc8r_test_1 ... done Creating orc8r_maria_1 ... done Creating elasticsearch ... done Creating fluentd ... done Creating orc8r_kibana_1 ... done Creating orc8r_proxy_1 ... done Creating orc8r_controller_1 ... done
If you want to run everything, including metrics, run:
HOST [magma/orc8r/cloud/docker]$ ./run.sh -all Creating orc8r_alertmanager_1 ... done Creating orc8r_maria_1 ... done Creating elasticsearch ... done Creating orc8r_postgres_1 ... done Creating orc8r_grafana_1 ... done Creating orc8r_config-manager_1 ... done Creating orc8r_test_1 ... done Creating orc8r_prometheus-cache_1 ... done Creating orc8r_prometheus_1 ... done Creating orc8r_kibana_1 ... done Creating fluentd ... done Creating orc8r_proxy_1 ... done Creating orc8r_controller_1 ... done
The Orchestrator application containers will bootstrap certificates on startup
which are cached for future runs. Watch the directory
for a file
admin_operator.pfx to show up (this may take a minute or 2), then:
HOST [magma/orc8r/cloud/docker]$ ls ../../../.cache/test_certs admin_operator.key.pem bootstrapper.key controller.crt rootCA.key admin_operator.pem certifier.key controller.csr rootCA.pem admin_operator.pfx certifier.pem controller.key rootCA.srl HOST [magma/orc8r/cloud/docker]$ open ../../../.cache/test_certs
In the Finder window that pops up, double-click
admin_operator.pfx to add the
local client cert to your keychain. The password for the cert is magma.
In some cases, you may have to open up the Keychain app in MacOS and drag-drop
the file into the login keychain if double-clicking doesn't work.
If you use Firefox, you'll have to import this .pfx file into your browser's installed client certificates. See here for instructions. If you use Chrome or Safari, you may have to restart the browser before the certificate can be used.
Connecting Your Local LTE Gateway to Your Local Cloud
At this point, you will have built all the code in the LTE access gateway and the Orchestrator cloud. All the services on the LTE access gateway and orchestrator cloud are running, but your gateway VM isn't yet set up to communicate with your local cloud.
We have a fabric command set up to do this:
HOST [magma]$ cd lte/gateway HOST [magma/lte/gateway]$ fab -f dev_tools.py register_vm
This command will seed your gateway and network on Orchestrator with some default LTE configuration values and set your gateway VM up to talk to your local Orchestrator cloud. Wait a minute or 2 for the changes to propagate, then you can verify that things are working:
HOST [magma/lte/gateway]$ vagrant ssh magma MAGMA-VM$ sudo service magma@* stop MAGMA-VM$ sudo service magma@magmad restart MAGMA-VM$ sudo tail -f /var/log/syslog # After a minute or 2 you should see these messages: Sep 27 22:57:35 magma-dev magmad: [2018-09-27 22:57:35,550 INFO root] Checkin Successful! Sep 27 22:57:55 magma-dev magmad: [2018-09-27 22:57:55,684 INFO root] Processing config update g1 Sep 27 22:57:55 magma-dev control_proxy: 2018-09-27T22:57:55.683Z [127.0.0.1 -> streamer-controller.magma.test,8443] "POST /magma.Streamer/GetUpdates HTTP/2" 200 7bytes 0.009s
Using the NMS UI
Magma provides an UI for configuring and monitoring the networks. To set up the NMS to talk to your local Orchestrator:
HOST [magma]$ cd symphony/app/packages/magmalte HOST [magma/symphony/app/packages/magmalte] $ docker-compose build magmalte HOST [magma/symphony/app/packages/magmalte] $ docker-compose up -d HOST [magma/symphony/app/packages/magmalte] $ ./scripts/dev_setup.sh
After this, you will be able to access the UI by visiting
https://magma-test.localhost, and using the email
password1234. We recommend Firefox or Chrome. If you see Gateway Error 502, don't worry, the
NMS can take upto 60 seconds to finish starting up.
You will probably want to enable this organization (magma-test) to access all networks, so go to master.localhost and login with the same credentials. Once there, you can click on the organization and then select "Enable all networks".
Note: If you want to test the access gateway VM with a physical eNB and UE, refer to the Connecting a physical eNodeb and UE device to gateway VM section.